Finding the particular specs of 2 guitars online is quite some work.
In many cases, the manufacturers don’t inform the same features about the instruments that you want to compare and you have to start digging all over the web to find them.
But hey, relax!
If you are here, it seems like I have already done that job for you.
Here is a brief description of these 2 guitars:
The Fender American Ultra Stratocaster is made in USA, has a solid alder body, a bolt-on Modern “D” maple neck, maple / rosewood fingerboard, and SSS / HSS pickups. The PRS Fiore is made in USA has a solid swamp ash body, a bolt-on Fiore Pattern “C” maple neck, maple fingerboard, and HSS pickups.
The Fender American Ultra Stratocaster has Fender Deluxe Die-cast Sealed Locking tuners, Ultra Noiseless Vintage Strat Single-coil (SSS) / Ultra Noiseless Hot Strat Single-coil (HSS) pickups, and Noiseless, Coil-tapping (HSS), S-1 neck pickup blend electronics. The PRS Fiore has Vintage-style tuners, PRS Fiore Single-coil pickups, and Series / Parallel, Gilmour voicing electronics.
For those who want a deeper dive into all the specs that make these 2 guitars different, in this article I will put them side by side so you can see their main differences.
After that, I will show you some sound tests I found, and give you a brief history of each one of them.
I will then talk about their main specs one by one, and link you to some other interesting articles I have written about these specific features.
Finally, I will give you some comments about each of these instruments.
Are you ready to get started?
Fender American Ultra Stratocaster and PRS Fiore side by side
|Fender American Ultra Stratocaster
|Years of production
|Gloss Nitrocellulose over CAB
|Fiore Pattern “C”
|Maple / Rosewood
|10″ – 14″ Compound
|Number of frets
|2-Point Fender Deluxe Synchronized Tremolo
|2-Point Steel Tremolo
|Fender Deluxe Die-cast Sealed Locking
|SSS / HSS
|Ultra Noiseless Vintage Strat Single-coil (SSS) / Ultra Noiseless Hot Strat Single-coil (HSS)
|PRS Fiore Single-coil
|Ultra Noiseless Vintage Strat Single-coil (SSS) / Ultra Noiseless Hot Strat Single-coil (HSS)
|PRS Fiore Single-coil
|Ultra Noiseless Vintage Strat Single-coil / Ultra Double Tap Humbucker
|PRS Fiore Humbucker
|Noiseless, Coil-tapping (HSS), S-1 neck pickup blend
|Series / Parallel, Gilmour voicing
|1 x Master Volume (with S-1 switch), 2 x Tone
|1 x Master Volume, 2 x Tone (push/pull extra pickup voicings, series/parallel)
|7 – 8 lbs
|7 – 8 lbs
|Jeff Beck, Ritchie Blackmore, Eric Clapton, Rory Gallagher, David Gilmour, Jimi Hendrix, George Harrison, Eric Johnson
What do they sound like?
Fender American Ultra Stratocaster play demo
PRS Fiore play demo
A brief description of the Fender American Ultra Stratocaster
“Introducing the Fender American Ultra Stratocaster: Fender’s high-performance iteration of the modern Stratocaster. It offers several upgrades over traditional designs, including Fender’s latest Ultra Noiseless Vintage Strat pickups, a 10″–14″ compound radius fingerboard on an effortless Modern “D” neck, and S-1 switching to roll in fat neck tones on pickup positions 1 and 2. Even if you’re a traditionally bent player, don’t be dismayed: the American Ultra Stratocaster is a Strat through and through. Its lightweight body is built from traditional Strat tonewoods (alder or ash, dependent on color) and outfitted with a flawless gloss poly finish and coordinating pickguard. Sealed locking tuners and a 2-point Deluxe Synchronised Trem with pop-in arm equip today’s players for classic Strat colorization with demanding modern intonation. One feature all our reviewers were quick to note is the tapered low-profile neck heel, which gives you access to fret positions you’d never dare into on your vintage Strat. The whole instrument has been thought out and designed in painstaking detail, all the way down to the embossed Fender headstock logo and extra comfortable trem arm.”Source: Sweetwater.com
A brief description of the PRS Fiore
“From his time with instrumental ensemble Snarky Puppy to countless studio sessions and his acclaimed solo work, Mark Lettieri knows a thing or two about guitars. Amid their constant journey to innovate the electric guitar, PRS decided to tap into Mark’s vast experience and knowledge, a collaboration that resulted in the Fiore. Directly developed with Mark, and incorporating many of his preferences, the PRS Fiore (Italian for “flower”) marries a stunning new double-cut design with top-notch electronics to produce a road-ready workhorse capable of a wide range of sounds. Bolted onto a maple neck, the Fiore’s swamp ash body delivers excellent resonance and sustain, while its silky-smooth maple fingerboard is perfect for playing styles of all kinds. Sweetwater’s many PRS loyalists love the newly designed Fiore pickups in the HSS configuration, as well as the universe of tonal potential accessible via its 5-way blade switch and push-pull knobs. For an added personal touch, a custom “Fiore” logo truss rod cover sits at the headstock, which was designed by Mark’s mother.”Source: Sweetwater.com
The Fender American Ultra Stratocaster has a solid body. The PRS Fiore is built with a solid body.
As you probably know, the body type of a guitar is a defining factor for its character and tone.
If you want to know more about how these kinds of bodies affect these guitars, you can check out this article:
The Fender American Ultra Stratocaster has a Stratocaster body. The PRS Fiore is built with a Super Strat body.
The shape of a guitar’s body has serious implications on its playability, but not so much on its tone.
If you want to know everything about the effect of guitar body shapes, and their influence on the instrument, check out this article:
The Fender American Ultra Stratocaster has a solid alder body. The PRS Fiore is built with a solid swamp ash body.
The kind of material used to build a guitar’s body is something you should really pay attention to.
This is one of the main factors that define the tone of an instrument.
If you want to know how these specifics materials impact the tone of these guitars, you should take a look here:
Guitarists are often curious about how guitar tops affect tone.
There are many factors that contribute to the sound of a guitar, and whether it has a top is an important one. With so many options on the market, it can be difficult to make a decision.
The following article will explain what guitar tops are and why they matter, as well as provide guidance for those who want to learn more about these options.
In short, a guitar’s top has a slight, but perceivable, influence on its tone, however, they are mostly used for aesthetic purposes.
Whether your preferred guitar has one or not, it shouldn’t worry you too much.
However, if you want to know all there is about guitar tops, go here:
The Fender American Ultra Stratocaster has a gloss polyurethane finish. The PRS Fiore is painted with a gloss nitrocellulose over cab finish.
Guitar players know that there are many variables in determining the sound of a guitar. Yet, one of the most popular debates is about nitro vs poly.
Let’s explore this question, so you can make an informed decision for your next purchase.
These 2 finishes are both types of varnish that can be used to protect and beautify a guitar’s wood. They also have slightly different properties that some players argue can influence the tone of your guitar.
Nitro is a type of varnish that is thinner and less durable, while poly is thicker, way more durable, and cheaper.
Poly provides more protection from moisture and scratches, but some people argue it reduces resonance and sustain. Nitro wears off with time but has a more organic feel to the touch and is said to improve sustain and resonance.
The Fender American Ultra Stratocaster has a maple neck. The PRS Fiore is built with a maple neck.
The type of wood that a guitar neck is made of will have a significant impact on the tone of your guitar.
Tonewoods have different densities, hardness, and acoustic qualities.
The type of wood a guitar neck is built with will determine its final sound.
In the following article I present you a list of the most common tonewoods used in guitar necks, and the influence they could have on the tone of the instrument:
The Fender American Ultra Stratocaster has a Modern “D” neck. The PRS Fiore is built with a Fiore Pattern “C” neck.
The shape of a guitar neck has a significant impact on the tone and playability.
Guitar necks come in a variety of shapes, so it’s important to know what each of those shapes offers.
Luckily for you, I’ve compiled some general information about each different type of guitar neck shape so you can make an informed decision when choosing your next guitar:
The Fender American Ultra Stratocaster has a Fender Stratocaster headstock. The PRS Fiore is built with a PRS headstock.
The shape of a guitar’s headstock is not really a big defining factor for its tone.
However, many players argue that differences in mass, especially at the end of the neck can have some implications in tone.
In this article I go deep into that topic and answer the most pressing questions:
The Fender American Ultra Stratocaster has a bolt-on neck. The PRS Fiore is built with a bolt-on neck.
Guitar necks come in a variety of different joints, and each one has its own pros and cons.
Knowing the differences between each joint can help you decide which is best for you.
A guitar’s neck joint is what attaches the guitar’s neck to the body of the instrument.
There are 3 types of neck joints: bolt-on, set, and neck through.
Bolt-on necks are attached by screws at the heel of the neck and can be removed easily for repairs or customization.
Set necks attach to a pocket in the guitar’s body and stay put with glue.
In neck trough instruments, the neck elongates and becomes the central piece of the body, where most of its hardware is mounted. Then, there are wood “wings” glued to its side to complete the body shape.
If you want to know the specifics of each of these joints, check out this article:
The Fender American Ultra Stratocaster fretboard is made of maple / rosewood. The PRS Fiore fretboard is built of maple.
The material of a guitar’s fingerboards is as important as the one of the rest of the neck.
In conjunction, both these 2 parts have a deep impact on the final tone of the instrument.
Also, take into consideration that the fretboard is the point of contact for your playing fingers with the guitar, so feel is also a very important factor.
In the following article, I share my thoughts on different fingerboard materials and their impact on the final sound of the instrument:
The Fender American Ultra Stratocaster has a 10″ – 14″ Compound radius. The PRS Fiore is built with a 10″ radius.
The radius of the fingerboard is a measure of how curved the neck of the guitar actually is when looking at it from bridge to nut.
This curvature is really a defining factor for how the instrument plays, and some players are very strict about it.
If you want to know more about how it’s measured and the effect it has on the playability of a guitar, you should look at the following article:
The Fender American Ultra Stratocaster has 22 medium jumbo nickel silver frets. The PRS Fiore is built with 22 medium jumbo nickel silver frets.
The frets on a guitar have a deep impact on its playability.
Many players don’t consider this as important as other features, but more experienced ones will be very picky about this.
Bigger frets make a guitar easier to play, however, they hinder the overall intonation of the instrument.
Also, there are different fret materials to consider.
In these articles, I dive deep into how important are frets for a guitar.
The Fender American Ultra Stratocaster has a 25.5″ scale length. The PRS Fiore is built with a 25.5″ scale length.
The scale length of a guitar refers to the longitude of the vibrating part of the string.
This is measured from the nut to the bridge, and for intonation purposes, the middle point is always the 12th fret.
Different scale lengths have varying influences over things such as string tension, and of course, fret gap size.
If you want to know more about this, I invite you to read the post below:
The Fender American Ultra Stratocaster has a 2-Point Fender Deluxe Synchronized Tremolo bridge. The PRS Fiore is built with a 2-Point Steel Tremolo bridge.
A guitar’s bridge is one of the 2 points of contact the strings have with the body and neck.
It is a central part for the transmission of vibrations through the instrument, and also defines many important factors for playability such as string spacing and action.
Some bridges also have extra functionalities.
To know everything there is about this part of the guitar, please go here:
The Fender American Ultra Stratocaster has a bridge integrated tailpiece. The PRS Fiore is built with a bridge integrated tailpiece.
Tailpieces are often forgotten when thinking about guitar parts, however, they have been there for centuries, and there are many different designs with alternate features.
Whether your guitar has a standalone one or a bridge that works like one too, you might be interested in broadening your knowledge about tailpieces here:
The Fender American Ultra Stratocaster has a bone nut. The PRS Fiore is built with a bone nut.
The nut of a guitar is a small but very important part of the instrument.
It helps define string spacing, action, and is the source of many of the tuning issues cheaper instruments suffer from.
There are many kinds and materials of nuts out there, and if you want to know how they can impact your instrument of choice, you should go to this article:
The Fender American Ultra Stratocaster has Fender Deluxe Die-cast Sealed Locking tuners. The PRS Fiore is built with Vintage-style tuners.
Guitar tuners don’t have a direct effect on how a guitar sounds.
However, their quality will be a defining factor in your playing experience.
It’s fundamental that your instrument has good quality machine heads to keep it in tune.
In the following article, I dive deep into the most common questions players ask about tuners, and their functionality:
Guitar pickups are one of the main components of any electric guitar.
But do guitar pickups make a difference in sound? This can be a difficult question with many different answers.
The most important thing to note is that it is not just the type of pickup that determines a guitar’s sound, but also how and where you place the pickup on the guitar.
In this guide, we will discuss the different types of pickups and how they affect your sound.
We will outline how pickups work and what are the central factors that determine how they influence the tone of your instrument.
Finally, we will help you compare different models and make an informed decision about which pickup is right for you.
The Fender American Ultra Stratocaster has Noiseless, Coil-tapping (HSS), S-1 neck pickup blend electronics, 1 x master volume (with s-1 switch), 2 x tone controls, and a 5-way blade switch. The PRS Fiore is built with Series / Parallel, Gilmour voicing electronics, 1 x master volume, 2 x tone (push/pull extra pickup voicings, series/parallel) controls, and a 5-way blade switch.
The electronics of an electric guitar are what give the instrument its name. However, because they are hidden inside the cavities into its body, they are often forgotten.
Controls, switches, capacitors and resistances, all make for the circuitry of a guitar, and all have effects on the final tone and sounds it can offer to the player.
If you want to know the main things about this topic, I recommend you follow this link:
The Fender American Ultra Stratocaster weighs 7 – 8 lbs, and the PRS Fiore weighs 7 – 8 lbs.
Guitar weight is an important factor when it comes to finding the right guitar for you.
A heavier guitar will give you more sustain, but a lighter guitar will be more resonant, and easier to play and carry around.
However, there’s no single answer to whether a lighter or heavier guitar will sound better than the other.
There are also many factors that could determine what weight of guitar would be best for you.
Here, I explore some of these considerations and what I think are the main points to take into account:
The Fender American Ultra Stratocaster is a modern take on the traditional strat with every luxury you could think of.
The PRS Fiore is a super strat designed by PRS to cater Mark Lettieri needs. More focused on fusion tones than shredding, but very versatile nonetheless.
Which one do you think you like better?
Hello there, my name is Ramiro and I’ve been playing guitar for almost 20 years. I’m obsessed with everything gear-related and I thought it might be worth sharing it. From guitars, pedals, amps, and synths to studio gear and production tips, I hope you find what I post here useful, and I’ll try my best to keep it entertaining also.